We feature select speakers, turntables, amps, DACs, accessories, and headphones
We have so many great brands that it seems crazy to pick a few out for a gift guide. But here we go with some expected stars, some sleeper hits, and some forgotten beauties.
Speakers
Take a Stand: Wharfedale Linton Heritage

The Linton moves a lot of air with a dedicated 5" midrange driver between its 8" woofer and soft-dome tweeter.
The Linton is warm, weighty, and bad-ass, and the stunning matching stand-cum-record-shelf, makes for the perfect package. It is a three-way bass-reflex standmount with an 8" woven-Kevlar woofer, a separate 5" woven-Kevlar midrange driver, and a 1" soft-dome tweeter. Sensitivity is rated at 90 dB, with a nominal impedance of 6 ohms and frequency response of 40 Hz–20 kHz. Yes, three-way means two crossover points, but it also means three dedicated drivers to move a lot of air.
For Point-Source-philes: Fyne Audio F501S

Fyne's IsoFlare driver places the tweeter at the center of the bass-midrange cone for point-source operation.
Fyne Audio's killer-app is that its technology flows, not trickles, down through its entire range. The F501S is one of many sweet spots, with its 2.5-way floorstander built around Fyne's IsoFlare point-source driver. A 25 mm magnesium-dome compression tweeter sits at the center of a 6" bass-midrange cone, placing their outputs on a common axis. A second 6" driver supplements the bass. The downward-firing port feeds a BassTrax tractrix diffuser, which distributes the port's output around the speaker's base. Find out the true meaning of "pinpoint imaging."
Nature's Way with Moss Green and Flax: Focal Aria Evo X No1

The flax-cone midrange uses Focal's Tuned Mass Damper surround to control resonance.
Perhaps the best-looking speaker in our entire line-up. Moss green goes beautifully with the flax-cone bass-midrange driver that uses Focal's Tuned Mass Damper surround to control resonance. This two-way bass-reflex bookshelf speaker uses a 6.5" flax-cone bass-midrange driver and a 25 mm aluminum/magnesium TAM tweeter with an M-shaped inverted dome. Put these on good stands and find out why standmounts are so beloved. With speakers this nice-looking, no one will mind if they come out into the room.
A Good Slap in the Face: Klipsch Forte IV

Horn-loaded midrange and treble drivers contribute to the Forte IV's 99 dB sensitivity; a rear 15" passive radiator supplements the bass.
Few speakers do impact and dynamics like Klipsch. The Forte IV combines a 12" woofer with horn-loaded midrange and high-frequency compression drivers. Its midrange horn incorporates Klipsch's Mumps geometry to control dispersion, while a rear-mounted 15" passive radiator extends bass output without a conventional reflex port. Once you hear snare drums on these horns, every other technology will sound slow and rounded.
Turntables
It'll Spin You Right Round: Rega Planar 2 with Carbon Cartridge

The Planar 2 combines a 10 mm glass platter with Rega's RB220 tonearm and a fitted Carbon MM cartridge.
Rega is our go-to brand in the budget category. (The Planar 8 and higher are amazing, but there are other viable options at that level, depending on what you need.)Â The belt-driven Planar 2 pairs Rega's RB220 tonearm with a factory-fitted Carbon moving-magnet cartridge. It uses a 10 mm float-glass platter, a 24 V low-noise motor, and a self-securing brass main bearing. The RB220 has a one-piece aluminum arm tube and low-friction bearings. Music sounds sleepy on everything else after you've experienced a Rega going full-tilt.
Not Just for DJs: Technics SL-1500C with Ortofon 2M Red

A supplied Ortofon 2M Red and built-in phonostage allow the SL-1500C to connect directly to a line-level input.
The features and engineering that make Technics a DJ favorite also apply to the audiophile. The SL-1500C combines a coreless direct-drive motor, an S-shaped tonearm with a removable headshell, and a supplied Ortofon 2M Red moving-magnet cartridge. Its built-in phonostage allows connection to a line-level input. Adorn your audio rack with that classic Technics silver.
The Craft Work: Clearaudio Signature Satisfy

Tacho-Speed-Control continuously monitors rotational speed and adjusts the motor in response to changing loads.
This is the German brand that non-turntable manufacturers turn to for designing and manufacturing tables for them. Packed with famed Clearaudio engineering, the Signature uses a 12 V coreless DC motor with Tacho-Speed-Control, which monitors platter speed and feeds corrections back to the motor electronics. An O-ring motor suspension limits vibration transfer, while adjustable feet provide leveling. The Satisfy Black tonearm uses sapphire bearings, an aluminum arm tube, adjustable cartridge azimuth, and continuous wiring from the cartridge connections to the phonostage connections. Truly among the best-built turntables in hi-fi.
Three-Motor Finger: Dr. Feickert Trio SE Upscale Audio Exclusive Turntable

Three motors arranged in an equilateral triangle around the platter balance belt forces and reduce lateral load on the main bearing.
Kevin loved this model so much, he had the German turntable legend bring it back, but better. The Trio SE uses the Firebird's three-motor arrangement in a walnut-finished chassis designed for a single tonearm. Developed from the Venti, it adds revised motor suspension and decoupling, a redesigned steel bearing bed, modified chassis grounding, and adjustable spike feet coupled to the chassis. Experience the smoothness and stability of not one high-end motor, but three.
Amplifiers
Go, New Acoustic Dimension: NAD C 316BEE V2

The V2 adds an MM phonostage with an infrasonic filter to NAD's analog integrated-amplifier design.
With tone controls and many features, NAD brings everyman audio into the hi-fi space. The C 316BEE V2 integrated amplifier is rated at 40 W per channel. It uses a toroidal power transformer and NAD's PowerDrive circuitry. Connections include an MM phono input, line-level inputs, a front-panel input for portable sources, and a headphone output. Bass and treble controls can be bypassed with the tone-defeat function. The phonostage includes an infrasonic filter.
The Most Musical of Them All: Musical Fidelity M5xi

The M5xi combines separate power-amplifier channels with MM/MC phono and HDMI eARC inputs.
An underrated brand with the happiest, most loyal customers. The M5xi combines a separate preamp stage with two discrete monobloc power-amplifier sections. Rated output is 160 W per channel into 8 ohms and 240 W into 4 ohms. It includes an MM/MC phonostage and a DAC with HDMI eARC, USB-C, optical, and coaxial inputs. Home-theater bypass, fixed line outputs, and variable preamp outputs support integration with other equipment. Once you hear this great British brand, you'll truly understand that elusive term "musicality."
Tubes Made Easy: PrimaLuna EVO 200 Integrated

Adaptive AutoBias manages the EL34 output tubes without manual bias adjustment.
Don't fear tubes with PrimaLuna as its products are packed with technology to make owning tubes easy and inexpensive. The EVO 200 is a tube integrated amplifier rated at 44 W per channel into 8 ohms with its supplied EL34 output tubes. Four 12AU7 tubes serve the small-signal stages. Adaptive AutoBias automatically manages output-tube bias. Connections include four stereo line inputs, home-theater bypass, a tape output, a headphone output, and separate 4- and 8-ohm speaker taps. PrimaLuna amps use the entire tube circuit for the headphones, so you get a proper tube headphone amp as well.
Sparkle and Slam: PrimaLuna EVO 300 Hybrid Integrated

A 12AU7 tube preamp feeds Exicon MOSFET output stages rated at 100 W per channel into 8 ohms.
When you want the best of both worlds, this hybrid mates tube magic and sparkle with solid-state bass depth and impact. The EVO 300 Hybrid combines a six-12AU7 tube preamp section with a solid-state power stage using Exicon MOSFETs. Output is rated at 100 W per channel into 8 ohms and 160 W into 4 ohms. Its dual-mono architecture uses separate custom-wound toroidal power transformers. The tube stage incorporates two gain tubes and four driver tubes to lower its output impedance. When you can't get enough, add another and run them as monoblocks for ultra-high-end scale and immersion.
Streamers and DACs
Thumb-Sized Hi-Fi: AudioQuest DragonFly Copper

The USB-powered DragonFly Copper combines digital conversion and headphone amplification without a separate power supply.
The DragonFly series is firmly established as the best way to get hi-fi on the go. The new Copper combines a USB DAC, preamp, and headphone amplifier in a USB-powered enclosure. It uses a 32-bit ESS Sabre DAC/headphone-amplifier chip, with output volume controlled by the connected device. Its copper-plated case is designed to drain RF noise. The illuminated emblem indicates playback sample rate, and a DragonTail USB-A-to-USB-C adapter is included. Find out just how good phone audio can get.
The No-Brainer: Bluesound NODE NANO

Analog and digital outputs let the NODE NANO serve as either a streaming DAC or a transport for an existing DAC.
Bluesound is the easy-to-use, easy-on-the-ears go-to for us to get hesitant customers into digital audio. The NODE NANO is a BluOS network streamer with an ESS ES9039Q2M DAC and support for audio up to 24-bit/192 kHz. Stereo RCA outputs connect to an amplifier, while optical, coaxial, and USB audio outputs allow an external DAC to handle conversion. It supports Ethernet, Wi-Fi, AirPlay 2, and two-way aptX Adaptive Bluetooth, and can join a BluOS multiroom system. When customers upgrade, the Bluesound almost always stays, moving into a smaller system elsewhere in the home.Â
Rich and Feature-Laden: Eversolo Play CD Edition

The CD Edition adds disc playback and ripping to a network streamer with built-in speaker amplification.
Eversolo is a key player in the wave of great-sounding, feature-rich hi-fi products from China. The Play CD Edition combines network streaming, CD playback and ripping, an AKM AK4493SEQ DAC, and a class-D amplifier rated at 60 W per channel into 8 ohms or 110 W into 4 ohms. It includes HDMI ARC, MM/MC phono inputs, and a subwoofer output. A 5.5" touchscreen provides local control, with parametric EQ and room-correction functions available for system adjustment. If you like that "velvet sound" and love to play with settings and EQ, it's hard to find better at this price.Â
Focus on Essentials: Lumin D3

LEEDH digital volume control allows the D3's balanced analog outputs to feed a power amplifier directly.
Not everyone wants touchscreens and endless lists of features, and Lumin is the product for them. The D3 combines network streaming with an ESS ES9028PRO DAC supporting PCM up to 32-bit/384 kHz and DSD256, with selectable upsampling to either format. Its fully balanced analog stage incorporates buffer technology from Lumin's flagship X1 and provides XLR and RCA outputs. LEEDH processing handles digital volume adjustment. Many happy customers have dispensed with a preamp and run their Lumin via LEEDH straight into their power amps; it sounds so detailed, open, and musical.
Time to Accessorize
Get Into the Groove: MoFi Anti-Static Record Brush

Conductive contacts connect the handle to the carbon-fiber bristles, providing a path for static discharge.
Enjoy the ritual with a quality accessory. The MoFi brush uses carbon-fiber bristles to remove loose dust from a record's surface. An electrical path connects the bristles to conductive metal contacts on the handle, allowing static charge to pass through the user's hand. Rotating the handle cleans accumulated debris from the bristles.Â
Carry that Weight: Revolv Stylus Tracking Force Gauge

The Revolv gauge measures tracking force with specified precision of ±0.01 g and includes a calibration weight.
Be sure you're always getting the best out of your cartridge while adding the least wear to your LPs. The Revolv gauge measures cartridge tracking force up to 5 g, with a specified precision of ±0.01 g. Its backlit digital display provides a direct reading for comparison with the cartridge manufacturer's recommended tracking-force range. A 5 g calibration weight, carrying case, and batteries are included.
Explore Baerwald: MoFi Geo Disc Alignment Tool

The Geo Disc provides a Baerwald reference grid for setting cartridge overhang and offset angle.
For the expert DIYer. The Geo Disc is a platter-mounted cartridge-alignment protractor based on Baerwald geometry. Its printed reference grid is used to set cartridge overhang and offset angle on compatible tonearms with adjustable cartridge mounting.Â
Levitate, Levitate, Levitate: IsoAcoustics zaZen II

Integrated isolators support components weighing up to 40 lb. while reducing vibration transfer through the supporting surface.
Transform your turntable's sound with a quality support. The zaZen II combines a rigid platform with integrated IsoAcoustics isolators to reduce vibration transfer between a component and its supporting surface. It accommodates equipment weighing up to 40 lb. and has a 17" × 15" footprint. The platform is 1.65" high, with no height adjustment.
The Good Doctor: Record Doctor VI

Record rotation is manual; a powered vacuum removes cleaning fluid and suspended dirt from the grooves.
Get your records to be the best they can be. The Record Doctor VI is a vacuum record-cleaning machine with manual fluid application and record rotation. After cleaning fluid has been worked across the grooves, the motor-driven vacuum extracts the fluid and suspended contamination. It has a stain-resistant aluminum top, a record-turning handle that covers the label, and a supplied Clean Sweep applicator brush.
Power Conditioning for the People: AudioQuest PowerQuest 303

Four high-current outlets serve amplifiers, while eight linear-filtered outlets serve source components and other equipment.
Hear what power conditioning can do, without springing for the Niagara. The PowerQuest 303 provides 12 AC outlets: four high-current outlets for amplifiers and eight linear-filtered outlets for source components and other equipment. Its noise-dissipation system covers a specified 19-octave bandwidth. The chassis supports rack mounting, and a detachable PQ-415 power cable is supplied. And once you get the Niagara, this model can be used for TV systems as well as audio networking gear to drop the noise floor for everything downstream.
Headphones
Space and Separation: HiFiMan Edition XS

Stealth Magnet geometry reduces acoustic obstruction around the Edition XS's thin planar diaphragm.
The Edition XS is prized for its ability to layer and separate instruments while not losing its airiness even with its deep bass. It is an open-back planar-magnetic headphone using HiFiMan's NEO Supernano diaphragm and Stealth Magnet geometry. The thin diaphragm reduces moving mass, while the shaped magnets are designed to reduce interference with sound passing through the magnet array. Impedance is 18 ohms, rated sensitivity is 92 dB, and weight is 405 g.
Kinda Blue, Very Cool: Focal Azurys

The Azurys combines Focal's 40 mm M-shaped aluminum/magnesium drivers with closed-back passive isolation.
This is a balanced, everyday listen and everyday carry headphone. The Azurys is a wired, closed-back headphone with 40 mm aluminum/magnesium dynamic drivers using Focal's M-shaped dome. The enclosed earcups and insulating pads provide passive isolation. A magnesium yoke helps keep the weight to 306 g. Impedance is 26 ohms, and the supplied 1.25 m cable includes an inline microphone and remote.
Romanian Head Lifts: Meze Audio 109 Pro

The 50 mm driver combines a cellulose-carbon-fiber dome with a beryllium-coated polymer surround.
The 109 Pro combines bass warmth with treble sparkle in a stunning finish. It is an open-back headphone with a 50 mm dynamic driver. Its dual-composite diaphragm combines a cellulose-carbon-fiber dome with a beryllium-coated polymer surround. A copper-zinc stabilizer ring controls vibration, while the frame holds the driver within walnut earcups. The construction is modular for servicing, with detachable cables. Nominal impedance is 40 ohms.
The Ur Cans: Sennheiser HD 800 S

Angled 56 mm drivers work with an acoustic absorber that controls resonance in the driver system.
These are the long-standing reference for a detailed, neutral sound with excellent soundstaging. HD 800 S is an open-back dynamic headphone with 56 mm transducers positioned to direct sound toward the ears at an angle. Sennheiser's absorber technology controls a driver-system resonance to reduce the masking of other frequencies. The headband incorporates damping to limit vibration reaching the earcups. Nominal impedance is 300 ohms; both 6.3 mm and balanced 4.4 mm cables are supplied.
High-Flying Planars: Meze Audio Empyrean II

Rinaro's Hybrid Array driver uses two voice-coil geometries on one planar diaphragm to distribute sound around the ear.
The Empyrean II is for those who want a full-bodied, substantial sound and build. It is an open-back planar-magnetic headphone using Rinaro's Isodynamic Hybrid Array driver. Two differently shaped voice-coil traces occupy the same diaphragm, distributing their output to different regions around the ear. Its CNC-machined aluminum frame and carbon-fiber headband support a suspended leather headrest. Supplied Duo and Angled earpads provide different acoustic configurations. Nominal impedance is 32 ohms.