McIntosh MQ112 Environmental Equalizer
McIntosh MQ112 Environmental Equalizer
Product questions? Found a lower price?
Let us know: 909.931.9686 or chat.

McIntosh MQ112 Environmental Equalizer
Eight-band analog equalizer with ±12 dB adjustment, Tilt control, dual outputs, and balanced or unbalanced operation
The McIntosh MQ112 Environmental Equalizer provides precise analog control over the tonal balance of a two-channel audio system. Its eight-band equalizer allows adjustment at key points from 25 Hz to 10 kHz, giving listeners a direct way to compensate for room acoustics, system balance, or recordings that benefit from targeted tonal correction.
Each equalizer band offers ±12 dB of adjustment, while a separate Tilt control shifts the overall tonal balance by up to ±6 dB around a 650 Hz axis. This makes it possible to progressively increase bass while reducing treble, or do the reverse, without adjusting each frequency band individually.
Analog Equalization With Bypass
The MQ112 operates entirely in the analog domain and can be inserted between a preamplifier and power amplifier using either balanced or unbalanced connections. Input and output formats do not need to match, allowing it to serve as an interface between unbalanced and balanced components when required.
An EQ Control switch provides IN and OUT settings so the equalization circuitry can be bypassed for direct comparison with the untreated signal. A rear-panel EQ Control Trigger can also switch the equalizer in or out remotely, including through a programmable trigger on a compatible preamplifier.
Eight-Band and Tilt Controls
The eight equalizer bands are centered at 25 Hz, 50 Hz, 100 Hz, 200 Hz, 400 Hz, 1 kHz, 3 kHz, and 10 kHz. Together they provide broad control over bass weight, lower-midrange balance, vocal presence, and high-frequency energy without relying on digital signal processing.
The additional Tilt control provides a subtler overall tonal adjustment of ±6 dB at 20 Hz and 20 kHz. Its 650 Hz pivot point leaves the central portion of the audio range comparatively stable while changing the balance between low and high frequencies.
Flexible System Integration
Two pairs each of balanced and unbalanced outputs expand the MQ112 beyond basic equalization. The second output can feed another stereo system, support a bi-amplified loudspeaker configuration, or connect one or more subwoofers. For subwoofers without stereo inputs, the second output pair can be configured for mono operation.
The MQ112 can also be used with integrated amplifiers that provide removable preamp-to-power-amp jumpers, or connected through processor loops and tape monitor connections on compatible components. McIntosh Power Control connections allow it to switch on and off with the rest of a compatible system.
Specifications
Rated Output Voltage (Balanced / Unbalanced): 5 V / 2.5 V
Maximum Output Voltage (Balanced / Unbalanced): 20 V / 10 V
Maximum Input Voltage (Balanced / Unbalanced): 20 V / 10 V
Voltage Gain (Balanced / Unbalanced): 0 dB / 0 dB
Frequency Response (+0, -0.5 dB): 20 Hz to 20 kHz
Frequency Response (+0, -1 dB): 10 Hz to 100 kHz
Signal-to-Noise Ratio: 115 dB below rated output
Total Harmonic Distortion: 0.005% from 20 Hz to 20 kHz
Input Impedance (Balanced / Unbalanced): 20 kohms / 10 kohms
Output Impedance (Balanced / Unbalanced): 1,000 ohms / 500 ohms
Equalizer Controls: ±12 dB at 25 Hz, 50 Hz, 100 Hz, 200 Hz, 400 Hz, 1 kHz, 3 kHz, and 10 kHz
Tilt Control: ±6 dB at 20 Hz and 20 kHz; 650 Hz tilt axis
Balanced Inputs: 1
Unbalanced Inputs: 1
Balanced Outputs: 2
Unbalanced Outputs: 2
Dimensions (H × W × D): 3-15/16" × 17-1/2" × 15-11/16" (100 × 445 × 398 mm)
Weight: 15 lb. (6.8 kg)