Audio Research D-80 Stereo Power Amplifier
Audio Research D-80 Stereo Power Amplifier
This product is an exception to our normal return policy.
Product questions? Found a lower price?
Let us know: 909.931.9686 or chat.
This item qualifies to earn HiFives. What's a HiFive?
View full details

Audio Research D-80 Stereo Power Amplifier
80 Wpc, a fully balanced signal path, and automatic output-tube bias
The Audio Research D-80 brings technology derived from the Reference 80S to a more accessible stereo power amplifier. Its fully balanced, differential signal path uses two KT150 output tubes per channel to deliver 80 Wpc, combining substantial power with the dimensionality and tonal character for which Audio Research tube amplifiers are known.
The “D” designation reaches back to some of the amplifiers that helped establish Audio Research’s reputation. Although the D-80 acknowledges that history, its circuit and operation are thoroughly contemporary, with automatic biasing, balanced connectivity, and a 12 V trigger for integration into a modern audio system.
A Fully Balanced Pentode Design
The D-80 operates exclusively in pentode mode. Its signal path is fully balanced from the XLR inputs through the output stage, with both legs of each loudspeaker connection actively driven. Separate 4-, 8-, and 16-ohm output taps allow the amplifier to be matched appropriately to a wide range of loudspeakers.
Audio Research has kept the signal path and connection layout deliberately straightforward. The D-80 accepts balanced XLR inputs only, making it a natural partner for a balanced preamplifier such as the Audio Research LS-2, LS-3, or Reference 6SE.
Automatic Bias Adjustment
The automatic-bias system continuously monitors and adjusts the four KT150 output tubes during operation. It compensates for changes in AC line voltage and tube aging, eliminating routine manual bias adjustments while helping the amplifier maintain consistent performance throughout the life of its output tubes.
Built and Auditioned in Minnesota
The D-80 is built at the Audio Research facility in Minnesota. Each amplifier is tested twice and individually auditioned in the company’s reference system before leaving the factory.
Features
- 80 Wpc continuous output
- Circuit design derived from the Reference 80S
- Fully balanced, differential signal path
- Full pentode operation
- Two KT150 output tubes per channel
- Automatic output-tube bias adjustment
- Balanced XLR inputs
- 4-, 8-, and 16-ohm loudspeaker output taps
- Fully balanced output driving both loudspeaker legs
- 12 V trigger input
- Built, tested, and individually auditioned in Minnesota
Specifications
Power Output: 80 Wpc continuous
Input Sensitivity: 1.4 V RMS balanced for rated output
Gain (Into 8 Ohms): 25.5 dB
Input Impedance: 300 kohms balanced
Output Polarity: Non-inverting; balanced input pin 2 positive (IEC-268)
Output Taps: 4, 8, and 16 ohms
Output Regulation: Approximately 1 dB from a 16-ohm load to open circuit
Damping Factor: Approximately 8
Overall Negative Feedback: 15 dB
Slew Rate: 10 V/µs
Rise Time: 4 µs
Tube Complement: 4 KT150 output tubes (two matched pairs); 2 6H30 gain-stage tubes
Power Requirements: 105–130 V AC, 60 Hz
Power Consumption: 420 W at rated output; 221 W at idle; 3.6 W when off
Dimensions (H × W × D): 10.5" × 19" × 18.5" (260 × 482.6 × 470 mm); 21" (533 mm) deep including handles and connectors
Weight: 62 lb. (28.2 kg)