{"product_id":"sonus-faber-stradivari-floorstanding-speakers-pair","title":"Sonus faber Stradivari Floorstanding Speakers (pair)","description":"\u003ch1\u003eSonus faber Stradivari G2 Floorstanding Loudspeaker\u003c\/h1\u003e\n\n\u003ch3\u003e3.5-way floorstander with 1.1” tweeter, 5.9” midrange, dual 10.2” woofers, and 92 dB sensitivity\u003c\/h3\u003e\n\n\u003cp\u003eSonus faber’s Homage Collection combines the company’s most recognizable design language with technologies developed to improve driver control, resonance management, and spatial coherence. Made in Vicenza, Italy, the collection draws on the traditions of Italian musical-instrument making while incorporating modern technologies including Intono midrange loading, Phase Coherent crossover design, and advanced low-frequency systems.\u003c\/p\u003e\n\n\u003cp\u003eStradivari G2 is the second generation of the loudspeaker Sonus faber created in honor of Antonio Stradivari. Introduced 20 years after the original, its unusually broad front baffle is designed to increase the scale and width of the soundstage. The 3.5-way system combines a 1.1” DAD Arrow Point tweeter, 5.9” midrange, and two 10.2” woofers, with adjustable low-frequency response to help adapt its substantial bass output to different rooms.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003ch4\u003eIntono Midrange Technology\u003c\/h4\u003e\n\n\u003cp\u003eStradivari G2 uses Sonus faber’s Intono system to manage pressure within the sealed midrange enclosure. A calibrated duct channels and dissipates energy created by movement of the driver, reducing resonances within the chamber and allowing the crossover network to perform its filtering with fewer corrective components.\u003c\/p\u003e\n\n\u003ch4\u003eClepsydra Reflex System\u003c\/h4\u003e\n\n\u003cp\u003eThe woofer enclosure uses Sonus faber’s Clepsydra reflex system, named for its hourglass-shaped geometry. The design provides the required acoustic loading with a relatively compact duct, while its down-firing orientation makes placement less dependent on the distance between the loudspeaker and surrounding walls.\u003c\/p\u003e\n\n\u003ch4\u003eLow Frequency Adjuster\u003c\/h4\u003e\n\n\u003cp\u003eSonus faber’s Low Frequency Adjuster allows the bass response to be tailored to the listening room. A rear-panel four-pin connection uses a movable jumper with three positions, each providing a different low-frequency response. Rather than adding resistive components in series with the signal, the system changes the electrical damping of the bass section.\u003c\/p\u003e\n\n\u003ch4\u003eDual-Gap Woofers\u003c\/h4\u003e\n\n\u003cp\u003eThe two 10.2” woofers use a dual-gap motor system designed by Sonus faber. The symmetrical magnetic structure improves consistency of the motor force through the driver’s excursion and reduces distortion compared with a conventional magnetic circuit.\u003c\/p\u003e\n\n\u003ch4\u003ePhase Coherent IFF Crossover\u003c\/h4\u003e\n\n\u003cp\u003eStradivari G2 combines Sonus faber’s Phase Coherent design philosophy with IFF crossover topology. Carefully selected passive components and crossover points at 160 Hz, 220 Hz, and 2.2 kHz integrate the three driver sections while maintaining coherent timing and low distortion at high listening levels.\u003c\/p\u003e\n\n\u003ch4\u003eWide-Baffle Cabinet\u003c\/h4\u003e\n\n\u003cp\u003eThe distinctive elliptical cabinet retains the broad front soundboard that defines the Stradivari design. Non-parallel walls within the woofer chamber help prevent standing waves above the enclosure’s tuned frequencies. Seven layers of lacquer cover the wood cabinet, complemented by Italian leather and aluminum elements, with Graphite Wood, Red Wood, and Wenge Wood finishes available.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cp\u003e\u003cb\u003eSystem:\u003c\/b\u003e 3.5-way; sealed midrange enclosure with Intono; vented woofer enclosure with Stealth Ultraflex system\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTweeter:\u003c\/b\u003e 1 × 1.1” (28 mm) high-power neodymium extended-range soft-dome DAD Arrow Point\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMidrange:\u003c\/b\u003e 1 × 5.9” (150 mm) driver with neodymium magnet system\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWoofers:\u003c\/b\u003e 2 × 10.2” (260 mm) drivers with Dual Drive Motor System\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCrossover Frequencies:\u003c\/b\u003e 160 Hz, 220 Hz, 2.2 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCrossover:\u003c\/b\u003e Phase Coherent Level 3 with high-end components\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e 25 Hz–35 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSensitivity:\u003c\/b\u003e 92 dB SPL (2.83 V\/1 m)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNominal Impedance:\u003c\/b\u003e 4 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eConnectivity:\u003c\/b\u003e 4 binding posts for Mid-Hi and Low\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDecoupling System:\u003c\/b\u003e ZVT spikes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCabinet:\u003c\/b\u003e Elliptical high-gloss lacquered wood with black leather and aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (W × H × D):\u003c\/b\u003e 28.1” × 54” × 16.8” (715 × 1,374 × 428 mm)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 179.7 lb. (81.5 kg)\u003c\/p\u003e","brand":"Sonus faber","offers":[{"title":"Graphite","offer_id":54170459635896,"sku":"SF-STRAD-GPH","price":60000.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54170459668664,"sku":"SF-STRAD-RED","price":60000.0,"currency_code":"USD","in_stock":true},{"title":"Wenge","offer_id":54170459701432,"sku":"SF-STRAD-WNG","price":60000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/STRADIVARI-GRAPHITE-3-4.jpg?v=1793648737","url":"https:\/\/upscaleaudio.com\/products\/sonus-faber-stradivari-floorstanding-speakers-pair","provider":"Upscale Audio","version":"1.0","type":"link"}