{"product_id":"mcintosh-mq112-environmental-equalizer","title":"McIntosh MQ112 Environmental Equalizer","description":"\u003ch1\u003eMcIntosh MQ112 Environmental Equalizer\u003c\/h1\u003e\n\u003ch3\u003eEight-band analog equalizer with ±12 dB adjustment, Tilt control, dual outputs, and balanced or unbalanced operation\u003c\/h3\u003e\n\u003cp\u003eThe McIntosh MQ112 Environmental Equalizer provides precise analog control over the tonal balance of a two-channel audio system. Its eight-band equalizer allows adjustment at key points from 25 Hz to 10 kHz, giving listeners a direct way to compensate for room acoustics, system balance, or recordings that benefit from targeted tonal correction.\u003c\/p\u003e\n\u003cp\u003eEach equalizer band offers ±12 dB of adjustment, while a separate Tilt control shifts the overall tonal balance by up to ±6 dB around a 650 Hz axis. This makes it possible to progressively increase bass while reducing treble, or do the reverse, without adjusting each frequency band individually.\u003c\/p\u003e\n\u003ch4\u003eAnalog Equalization With Bypass\u003c\/h4\u003e\n\u003cp\u003eThe MQ112 operates entirely in the analog domain and can be inserted between a preamplifier and power amplifier using either balanced or unbalanced connections. Input and output formats do not need to match, allowing it to serve as an interface between unbalanced and balanced components when required.\u003c\/p\u003e\n\u003cp\u003eAn EQ Control switch provides IN and OUT settings so the equalization circuitry can be bypassed for direct comparison with the untreated signal. A rear-panel EQ Control Trigger can also switch the equalizer in or out remotely, including through a programmable trigger on a compatible preamplifier.\u003c\/p\u003e\n\u003ch4\u003eEight-Band and Tilt Controls\u003c\/h4\u003e\n\u003cp\u003eThe eight equalizer bands are centered at 25 Hz, 50 Hz, 100 Hz, 200 Hz, 400 Hz, 1 kHz, 3 kHz, and 10 kHz. Together they provide broad control over bass weight, lower-midrange balance, vocal presence, and high-frequency energy without relying on digital signal processing.\u003c\/p\u003e\n\u003cp\u003eThe additional Tilt control provides a subtler overall tonal adjustment of ±6 dB at 20 Hz and 20 kHz. Its 650 Hz pivot point leaves the central portion of the audio range comparatively stable while changing the balance between low and high frequencies.\u003c\/p\u003e\n\u003ch4\u003eFlexible System Integration\u003c\/h4\u003e\n\u003cp\u003eTwo pairs each of balanced and unbalanced outputs expand the MQ112 beyond basic equalization. The second output can feed another stereo system, support a bi-amplified loudspeaker configuration, or connect one or more subwoofers. For subwoofers without stereo inputs, the second output pair can be configured for mono operation.\u003c\/p\u003e\n\u003cp\u003eThe MQ112 can also be used with integrated amplifiers that provide removable preamp-to-power-amp jumpers, or connected through processor loops and tape monitor connections on compatible components. McIntosh Power Control connections allow it to switch on and off with the rest of a compatible system.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRated Output Voltage (Balanced \/ Unbalanced):\u003c\/b\u003e 5 V \/ 2.5 V\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Voltage (Balanced \/ Unbalanced):\u003c\/b\u003e 20 V \/ 10 V\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Input Voltage (Balanced \/ Unbalanced):\u003c\/b\u003e 20 V \/ 10 V\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eVoltage Gain (Balanced \/ Unbalanced):\u003c\/b\u003e 0 dB \/ 0 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response \u003cb\u003e(+0, -0.5 dB)\u003c\/b\u003e:\u003c\/b\u003e 20 Hz to 20 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response \u003cb\u003e(+0, -1 dB)\u003c\/b\u003e:\u003c\/b\u003e 10 Hz to 100 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSignal-to-Noise Ratio:\u003c\/b\u003e 115 dB below rated output\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTotal Harmonic Distortion:\u003c\/b\u003e 0.005% from 20 Hz to 20 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Impedance (Balanced \/ Unbalanced):\u003c\/b\u003e 20 kohms \/ 10 kohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance (Balanced \/ Unbalanced):\u003c\/b\u003e 1,000 ohms \/ 500 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEqualizer Controls:\u003c\/b\u003e ±12 dB at 25 Hz, 50 Hz, 100 Hz, 200 Hz, 400 Hz, 1 kHz, 3 kHz, and 10 kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTilt Control:\u003c\/b\u003e ±6 dB at 20 Hz and 20 kHz; 650 Hz tilt axis\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBalanced Inputs:\u003c\/b\u003e 1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUnbalanced Inputs:\u003c\/b\u003e 1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBalanced Outputs:\u003c\/b\u003e 2\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUnbalanced Outputs:\u003c\/b\u003e 2\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (H × W × D):\u003c\/b\u003e 3-15\/16\" × 17-1\/2\" × 15-11\/16\" (100 × 445 × 398 mm)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 15 lb. (6.8 kg)\u003c\/p\u003e","brand":"McIntosh Labs","offers":[{"title":"Default Title","offer_id":54132937982136,"sku":"MQ112","price":3500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/MQ112FrontTophires.jpg?v=1792435718","url":"https:\/\/upscaleaudio.com\/products\/mcintosh-mq112-environmental-equalizer","provider":"Upscale Audio","version":"1.0","type":"link"}