GoldenEar Triton One.R Loudspeaker
Must be purchased in pairs.
The Triton Series Tower Speakers are high-performance loudspeakers, with the top four models including a built-in powered subwoofer. All the Triton Towers are engineered for superb performance in both high quality two channel stereo systems as well as in multi-channel home theater and music systems. Their sleek, elegantly curved and tapered design is not only gorgeous but is important from a performance perspective as well. Performance-wise, the Triton Towers all deliver boxless three-dimensional imaging, which reviewers have hailed as "mystical", "magical" - and, best summed up by the dramatic, "had us believing that the entire surface of the front wall was covered with speakers.". Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.
The New One.R
This extraordinary new reference quality loudspeaker is a smaller, less expensive follow up to the Triton Reference. The goal of the Triton One.R project was to bring the advanced technology, luxurious cosmetics and state-of-the-art performance of the flagship Triton Reference into a more compact and less expensive speaker. Its monocoque cabinet is constructed of multi-density medite, engineered with the goal of making it as non-resonant and inert as possible, thus eliminating extraneous vibration that could detract from the pure sound of the drivers.
To do this, an elaborate system combining bracing and damping pads, optimized with the use of an accelerometer-generated cumulative spectral decay analysis, is utilized. The baffle is as narrow as possible, minimizing diffraction issues, which is effective in helping to make the cabinet disappear, both sonically and visually. The sides of the speaker are not parallel, in order to minimize internal reflections, which again, purifies the sound. Similarly, the separate, internal enclosure that houses the upper bass/midrange drivers is designed with no parallel walls, for the same purpose. The chamber is filled with an inert mixture of Dacron and long fiber wool in order to critically dampen it. We have an integral built-in high-powered subwoofer in order to better integrate it with the rest of the loudspeaker.
Also, utilizing its 56-bit DSP gives us the ability to dramatically flatten and extend the low frequency response (much deeper than achievable in an enclosure this size with a passive bass section), as well as to enable us to achieve near ideal blending of the bass section with the rest of the system, especially in terms of phase response.
There are three newly designed racetrack shaped active subwoofer drivers on the front of the cabinet, which have special polymer impregnated nomex cones, in order to minimize cone breakup when strongly driven. Huge magnet structures are utilized in order to better control cone movement and improve transient response. There are four quadratic planar infrasonic radiators. They extend the low frequency response and are inertially balanced (two on each side) in order to minimize cabinet movement, resulting in clearer, more detailed sound.
The High Velocity Folded Ribbon tweeter, the same as used in the Triton Reference, is a new design that incorporates 50% more neodymium magnet material than previous units, for higher efficiency and greater control. The folded ribbon technology combines improved impedance coupling to the air of horn drivers (for greater efficiency), with the superior transient response and lack of coloration of ribbon drivers, and the dispersion of dome drivers. The two 5.25” upper bass/midrange drivers are also new, incorporating a special formulation of polypropylene, which combines superior internal damping with a high speed of transmission through the cone (Young’s Modulus).
A new focused field magnet structure, developed for the Triton Reference, has been incorporated for improved control. A unique “balanced” crossover, with a floating configuration, places components on both sides of the drivers, which has an improvement in sound quality that cannot be measured but can be clearly heard. Very high-quality bridging capacitors, as used in the Triton Reference, are also used. New internal speaker wire, which has a unique twist, as in the Triton Reference, is used with an advanced new topology. Careful attention in the development process is paid to critical measurements, conducted in our own large-scale anechoic chamber, as well as long listening and voicing sessions in the listening room, with all kinds of music. Voicing has been painstakingly worked on to mirror that of the Triton Reference.
The gorgeous cabinet is painstakingly finished in hand-rubbed piano black lacquer. It presents itself as an exquisite, sleek, ultra-high-performance lifestyle loudspeaker that delivers extraordinary sound quality comparable with speakers selling for many times the Triton One.R’s remarkably affordable price. The Triton One.R is shipping now.
Speaker dimensions (WHD): 8" x 16 5/8" x 54" (20.3 x 42.3 x 137.2 cm). With base installed, no spikes
Base: 12 3⁄8" x 19 13/16" (31.4 x 50.3 cm)
Weight: 80 lb (36.3 kg)
Frequency response: 13 Hz - 35 kHz
Efficiency: 92 dB
Nominal impedance: 8 ohm
Three 5" x 9" long-throw subwoofers coupled to
Four 7" x 10" quadratic planar infrasonic radiators
Two 5-1⁄4" high-definition cast-basket mid/bass drivers
One High-Gauss Neodymium Reference High-Velocity Folded Ribbon (HVFR) tweeter
Built-In Subwoofer Power Amplifier: 1600 W SuperSub Subwoofer digital/DSP amplifier
Power Requirements/Consumption: 120 Volt at 50 or 60 Hz / 1600 W