{"product_id":"final-audio-dx6000-open-back-dynamic-headphones","title":"Final Audio DX6000 Open-Back Dynamic Headphones","description":"\u003ch1\u003eFinal DX6000 Open-Back Headphones\u003c\/h1\u003e\n\u003ch3\u003eA magnesium-alloy diaphragm, Free Air Structure, and a lightweight OFC cable\u003c\/h3\u003e\n\u003cp\u003eThe Final DX6000 brings an open-back design to the DX series, pairing a newly developed dynamic driver with a precision-machined aluminum–magnesium-alloy housing. Its magnesium-alloy diaphragm is central to the design, combining high rigidity with high internal damping to help control unwanted resonance. Final describes the acoustic presentation as natural and expansive, with an “ear speaker” character that maintains bass presence without relying on a tightly sealed ear cavity.\u003c\/p\u003e\n\u003ch4\u003eDriver and Enclosure Working Together\u003c\/h4\u003e\n\u003cp\u003eThe diaphragm uses a thick, soft, lightweight foamed-silicone edge, molded directly around the magnesium diaphragm rather than attached with conventional adhesive. Final developed this construction to allow easy movement while suppressing unwanted resonance and avoiding variation from adhesive application. The voice-coil lead is suspended in air rather than bonded to the edge, so it does not interfere with the diaphragm’s motion. Proprietary aluminum-alloy voice-coil wire supports this arrangement.\u003c\/p\u003e\n\u003cp\u003eFinal’s Free Air Structure opens the airflow path through the rear of the driver, the ear pads, and the housing. A low driver resonant frequency allows the design to depend less on acoustic sealing for bass reproduction. The Transient Coil System adds a separate coil in series with the driver to reduce high-frequency output without adding mass to the moving assembly. Together, these elements support Final’s approach to combining an open acoustic structure with a lightweight diaphragm, edge, and voice coil.\u003c\/p\u003e\n\u003ch4\u003eBreathable Pads and a Detachable Cable\u003c\/h4\u003e\n\u003cp\u003eThe ear pads combine highly breathable foam with a special fabric containing Japanese washi paper. They are designed to provide a dry feel while allowing airflow rather than forming a tight acoustic seal. The headband uses the same type of surface material. Unlike tool-free replaceable pads, the DX6000’s pads are secured with special screws and must be replaced by Final; user replacement invalidates product-warranty coverage.\u003c\/p\u003e\n\u003cp\u003eA detachable 3 m OFC slim cable terminates in a 4-pin XLR plug. Developed for the DX series, the cable keeps weight low while providing a connection to compatible headphone amplifiers. A compact semi-hard case is also included for storage and transport.\u003c\/p\u003e\n\u003cp\u003eAmplifier matching matters here: the Transient Coil System causes impedance to rise from 47 ohms at 1 kHz to 480 ohms at 20 kHz. Final recommends a desktop amplifier with sufficient power and support for high-impedance loads rather than portable equipment.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic driver with a magnesium-alloy diaphragm\u003c\/li\u003e\n\u003cli\u003eIntegrally molded foamed-silicone edge without a conventional adhesive joint\u003c\/li\u003e\n\u003cli\u003eSuspended voice-coil lead and proprietary aluminum-alloy voice-coil wire\u003c\/li\u003e\n\u003cli\u003eOpen-back Free Air Structure with airflow through the driver, ear pads, and housing\u003c\/li\u003e\n\u003cli\u003eTransient Coil System that controls high-frequency output without adding mass to the moving assembly\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminum–magnesium-alloy housing\u003c\/li\u003e\n\u003cli\u003eBreathable foam ear pads with washi-paper fabric surfaces\u003c\/li\u003e\n\u003cli\u003eDetachable OFC slim cable with a 4-pin XLR termination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 m detachable OFC slim cable with a 4-pin XLR plug\u003c\/li\u003e\n\u003cli\u003eSemi-hard carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eTransducer Type:\u003c\/b\u003e Dynamic, with a magnesium-alloy diaphragm\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOperating Principle:\u003c\/b\u003e Open-back, over-ear\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEar Cushions:\u003c\/b\u003e Special fabric containing Japanese washi paper over highly breathable foam; replacement by Final required\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHousing:\u003c\/b\u003e Magnesium alloy\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable:\u003c\/b\u003e Detachable OFC slim cable, 3 m\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTermination:\u003c\/b\u003e 4-pin XLR source plug\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSensitivity:\u003c\/b\u003e 83 dB\/mW\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNominal Impedance (1 kHz):\u003c\/b\u003e 47 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eImpedance (20 kHz):\u003c\/b\u003e 480 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRecommended Amplification:\u003c\/b\u003e Desktop headphone amplifier with sufficient power and support for high-impedance loads\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 0.8 lb. (0.363 kg)\u003c\/p\u003e","brand":"Final Audio","offers":[{"title":"Default Title","offer_id":54067274285240,"sku":"FI-DX6DAL","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/DSC02115_1.jpg?v=1789579302","url":"https:\/\/upscaleaudio.com\/products\/final-audio-dx6000-open-back-dynamic-headphones","provider":"Upscale Audio","version":"1.0","type":"link"}